Eaton XTCE012B10A XT-IEC Contactor and Starter, 45mm, 12A AC-3 Current Rating, 3 Max HP at 230VAC, 7-1/2 Max HP at 460VAC, 10 Max HP at 575VAC, 120VAC Coil Voltage

The Eaton XT IEC contactor is an IEC magnetic contactor (3-pole) with a 120 V AC coil. The unit is configured as a Non-Reversing device with one normally open auxiliary contact. The unit uses screw terminals, supports DIN Rail or Panel mounting; the enclosure type is not specified. The product belongs to the XT series (Frame size B) and conforms to IEC standards for magnetic contactors. - Coil voltage: 120 V AC - Action: Non-Reversing - Poles: 3 - Main contact configuration: 1 NO - Auxiliary contact configuration: 1 NO - Frame size / Series: Frame B; Series XT - Contactor style: IEC - Mounting: DIN Rail, Panel - Electrical connection: Screw terminals - Rated for operation up to 690 V AC within specified conditions - Frequency: 50/60 Hz - Rated for full load currents of up to 12 A inductive and 22 A resistive loads under specified conditions - Suitable for applications requiring these horsepower ratings within their respective voltage ranges, based on manufacturer specifications - Embedded surge suppressor: Yes - Enclosure: No Enclosure - IP Rating: IP20 - Certifications / Standards: UL Listed; CSA Certified; IEC 60947; EN 60947; CE Marked; RoHS - Reversing: No - Response time: Less Than 12 msec (DC opening), Less Than 18 msec (AC opening), Less Than 21 msec (AC closing), Less Than 31 msec (DC opening)

• IEC contactors available from 7 to 2500 amps
• Reversing contactors, FVNR and FVR starters, and CMC’s (integrated Starters) available
• Low wattage coils are available in a wide range of both AC: 12V to 600V 50/60 Hz, DC: 12V to 220V
• DC coil has same physical dimensions as AC coil
• Panel or DIN rail mounting; UL Listed, CSA Certified, CE Compliant